Bass Fishing Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
87 Posts
Discussion Starter #1
My day on Decker came to an abrupt halt when I pressed down on the front of my steering pedal. sparks, fireworks and smoke. I pulled the electrical plug before anything further happened. There is a power wire (black w/ red stripe) that was cut by an uninsulated metal wire connector on the yellow wire attached to the speed switch. Because of the way the wires are routed inside the pedal assembly the power wire was on a collision course with the switch connector for quite sometime. My motor is 3 years old. I repaired the wires and connector using lots of Gorilla tape and shrink wrap and moved the power wire. I'll be checking my motor wires on a regular from now on.
 
1 - 1 of 1 Posts
Top